| Hotmelt steel belt systems |
 |
BPS-SBC-HOTMELT could retrieve from his old customer, which is one of the biggest producers of Industrial adhesives, a complete and Chinese production plant for Hotmelt and Melt Pressure sensitive adhesives.
The unit was in use until March 2009 and is still in very good condition. It consists of special Hotmelt reactors, buffer tank, pipe work, pre-filter, pump and fine filter, a cooling belt unit with strip former and pastillator, a hot oil unit, 2 hot oil secondary oil circuits, the bagging line and a bag transport conveyor. A detailed description could be provided upon request.
BPS-SBC-HOTMELT is not only able to provide the complete plant incl. engineering works, layout drawing, PID´s, and a complete plant manual but also the necessary expertise to produce various Hotmelt and Melt Pressure Sensitive Adhesives depending on the market demand.
The mixing setup is suitable and geared to produce any type of EVA/Metallocene and APAO based heat seal adhesive (for case sealing, laminations and heat seal applications) and with its present setup can handle even highly filled (e.g. CaCO3) formulations as well as high viscosity – high temp APAO formulations.
The 30kw motor of the BPS-SBC-HOTMELT Hotmelt mixer allows for the safe (as compared to a sigma blade) mixing of BPS based HMPSA’s (hot melt pressure sensitive adhesives) with viscosities of up to 30,000 cps (mPas) at 177° C as well as lower viscosity butyl grades.
This would cover 90% of all types of heat seal and 80% of all types of HMPSA’s presently being manufactured and used. With an upgrade of the motor to 60kw the rest could be manufactured as well.
|
|
